OSTİM Technical University Library

Sepetiniz boş.

Interface Oral Health Science 2016 : Innovative Research on Biosis-Abiosis Intelligent Interface.

Yazar:Sasaki, Keiichi
Katkıda bulunan(lar):Suzuki, Osamu | Takahashi, Nobuhiro
Materyal türü: KonuKonuYayıncı: Singapore : Springer Singapore Pte. Limited, 2016Telif hakkı tarihi: �2017Tanım: 1 online resource (273 pages)İçerik türü:text Ortam türü:computer Taşıyıcı türü: online resourceISBN: 9789811015601Tür/Form:Electronic books.Ek fiziksel biçimler:Print version:: Interface Oral Health Science 2016DDC sınıflandırma: 617.522 LOC classification: RKÇevrimiçi kaynaklar: Click to View
İçindekiler:
Intro -- Preface -- Acknowledgment -- Contents -- Part I: Symposium I: Biomaterials in Interface Science -- Chapter 1: Low-Modulus Ti Alloys Suitable for Rods in Spinal Fixation Devices -- 1.1 Introduction -- 1.2 Mechanism of Increasing Young's Modulus in Deformed Region -- 1.3 Possible Alloy System -- 1.4 Ti-Mo Alloys -- 1.4.1 Microstructures Before and After Deformation -- 1.4.2 Young's Modulus Change by Deformation -- 1.4.3 Deformation-Induced Products and Phase Constitutions -- 1.4.4 Springback -- 1.5 Ti-Cr Alloys -- 1.5.1 Microstructures Before and After Deformation -- 1.5.2 Young's Modulus Change by Deformation -- 1.5.3 Deformation-Induced Products and Phase Constitutions -- 1.5.4 Springback -- 1.6 Young's Modulus Under Solution Treatment Conditions and Increment Ratio of Young's Modulus by Cold Rolling -- 1.7 Toward Practical Applications -- 1.8 Summary -- References -- Chapter 2: Ceramic Coating of Ti and Its Alloys Using Dry Processes for Biomedical Applications -- 2.1 Introduction -- 2.2 Antibacterial Properties of Ag-Containing Amorphous Calcium Phosphate Coating Films -- 2.3 Photocatalytic Activity of TiO2 Layers Formed by Two-­Step Thermal Oxidation -- 2.3.1 UV (Ultraviolet) Response -- 2.3.2 Visible-Light Response -- 2.4 Summary -- References -- Chapter 3: Dealloying Toxic Ni from SUS316L Surface -- 3.1 Introduction -- 3.1.1 Dealloying in a Metallic Melt -- 3.1.2 Reaction Design for Dealloying Ni from SUS316L -- 3.2 Experimental Procedure -- 3.3 Results and Discussion -- 3.3.1 Dealloying Ni Treatments -- 3.3.2 Polarization Tests -- 3.3.3 Ion Release Tests -- 3.4 Conclusions -- References -- Chapter 4: Bio-ceramic Coating of Ca-Ti-O System Compound by Laser Chemical Vapor Deposition -- 4.1 Introduction -- 4.2 Laser Chemical Vapor Deposition -- 4.3 Bio-ceramic Coating of Ca-Ti-O by Laser CVD [25, 26] -- 4.4 Summary -- References.
Part II: Symposium II: Innovation for Oral Science and Application -- Chapter 5: Development of a Robot-Assisted Surgery System for Cranio-Maxillofacial Surgery -- 5.1 General Information of Surgical Robots -- 5.2 Computer-Aided Design (CAD) System for CMF Surgery -- 5.3 Surgical Robot for CMF Surgery -- 5.3.1 Conformation of the Robotic System -- 5.3.2 Safety Control of the Robotic System -- 5.3.3 Navigation and Trail Program -- 5.3.4 Test of the Robot -- 5.4 Medical Experiment for the Robotic System -- 5.4.1 Evaluation of the CAD Software -- 5.4.2 Accuracy of the Three-Dimensional Reconstruction of the CAD Software -- 5.4.3 Accuracy of the Navigation System -- 5.4.4 Animal Experiment of Robot-Assisted Operations -- References -- Chapter 6: Facilitating the Movement of Qualified Dental Graduates to Provide Dental Services Across ASEAN Member States -- 6.1 Formation of ASEAN to AJCCD -- 6.2 MRA for Free Flow of Services and Professionals -- 6.3 Impact on Dental Education -- 6.4 Facilitating Free Movement of Dental Professionals Across ASEAN -- 6.4.1 Current Work -- 6.4.2 Future Work -- 6.5 Conclusion -- References -- Chapter 7: Putting the Mouth into Health: The Importance of Oral Health for General Health -- 7.1 Introduvction -- 7.2 The Oral-Systemic Nexus -- 7.3 Oral-Systemic Health Associations -- 7.4 The Oral Environment: A Model for Other Body Systems -- 7.5 Summary -- References -- Chapter 8: Orofacial Stem Cells for Cell-Based Therapies of Local and Systemic Diseases -- 8.1 Overview -- 8.1.1 Need for Stem/Progenitor Cell-Based Therapy -- 8.1.2 Cell Sources During Orofacial Development -- 8.2 Mesenchymal Stem Cell-Derived Oral Tissues -- 8.2.1 Markers and Sources of Orofacial MSCs -- 8.2.2 Mesenchymal Stem Cells of Dental Pulp Stem Cells (DPSCs) -- 8.2.3 MSCs of the Periodontal Ligament, Apical Papilla and Follicles -- 8.3 Muscle Stem Cells.
8.3.1 Potential of Orofacial Muscle Stem Cells in Cardiac Repair -- 8.3.2 Developmental Similarities of Cardiac and Orofacial Myogenic Progenitors -- 8.3.3 An Interesting Example of Using Tongue Stem Cell for Cardiac Repair -- 8.4 Closing Remark -- References -- Chapter 9: Biomaterials in Caries Prevention and Treatment -- 9.1 Synthesis of Novel Mineralization Materials in Preventive Dentistry -- 9.2 Quaternary Ammonium Methacrylates (QAMs) -- 9.2.1 Killing Bacteria and Inhibiting Biofilms -- 9.2.2 Mechanical Properties -- 9.2.3 Durability -- 9.2.4 Biological Safety -- 9.2.5 Inhibiting MMPs -- 9.2.6 Mechanism -- 9.2.7 Resistant/Persister Bacteria -- 9.2.8 Models -- References -- Part III: Symposium III: Regenerative Oral Science -- Chapter 10: Efficacy of Calcium Phosphate-Based Scaffold Materials on Mineralized and  Non-­mineralized Tissue Regeneration -- 10.1 Introduction -- 10.2 Mineralized and Non-mineralized Tissue Responses -- 10.3 Matrix Materials for Calcium Phosphate -- 10.4 Cell Responses to Calcium Phosphate Materials -- 10.5 Conclusion -- References -- Chapter 11: Gene Delivery and Expression Systems in Induced Pluripotent Stem Cells -- 11.1 Introduction -- 11.2 Viral-Based Gene Delivery Systems -- 11.2.1 Adenovirus Vectors -- 11.2.2 AAV Vectors -- 11.2.3 Retrovirus Vectors -- 11.2.4 Lentivirus Vectors -- 11.3 Transposon-Based Gene Delivery Systems -- 11.4 tet-Controlled Transcriptional Regulation System -- 11.5 Conclusions -- References -- Chapter 12: Emerging Regenerative Approaches for Periodontal Regeneration: The Future Perspective of Cytokine Therapy and Stem Cell Therapy -- 12.1 Introduction -- 12.2 Periodontal Ligament as a Storage Site for Periodontal Tissue Stem Cells -- 12.3 Concept and Current Status of Periodontal Tissue Regenerative Therapy -- 12.4 Possibility of Cytokine Therapy.
12.5 Inducing Periodontal Tissue Regeneration with Basic Fibroblast Growth Factor (FGF-2) -- 12.6 Future Outlook of Cytokine Therapy Using FGF-2 -- 12.7 Possibility of Periodontal Tissue Regenerative Therapy with Stem Cell Transplantation -- 12.8 Conclusion -- References -- Chapter 13: Molecular Mechanisms Regulating Tooth Number -- 13.1 Introduction -- 13.2 Skin Appendage -- 13.3 Missing Teeth -- 13.3.1 Missing Teeth in Humans -- 13.3.1.1 Non-syndromic (Isolated) Familial Missing Teeth -- 13.3.1.2 Syndromic Missing Teeth -- 13.3.1.3 Sporadic Missing Teeth -- 13.3.2 Missing Teeth in Mice -- 13.4 Supernumerary Teeth -- 13.4.1 Supernumerary Teeth in Humans -- 13.4.1.1 Syndromic Extra Teeth in Humans -- 13.4.1.2 Missing and Extra Teeth in Humans -- 13.4.2 Supernumerary Teeth in Mice -- 13.5 Odontogenic Activity Between Tooth Germs -- 13.6 Tooth Initiation and Tooth Type -- 13.7 The Midline and Tooth Development -- 13.8 Conclusion -- References -- Part IV: Symposium IV: Medical Device Innovation for Diagnosis and Treatment of Biosis- Abiosis Interface -- Chapter 14: Open-Source Technologies and Workflows in Digital Dentistry -- 14.1 Cloud Base Solution for Intelligent Dental Clinic and Manufacturing System -- 14.2 Integration of Digital Information -- 14.3 A Shade Guide Development Based on Open-Source Technology -- 14.4 3D Printing Applications in Digital Dentistry -- 14.5 Conclusions -- References -- Chapter 15: Detection of Early Caries by Laser-Induced Breakdown Spectroscopy -- 15.1 Introduction -- 15.2 Experimental Setup -- 15.3 Results and Discussion -- 15.4 Conclusion -- References -- Chapter 16: Acoustic Diagnosis Device for Dentistry -- 16.1 Introduction -- 16.2 Materials and Methods -- 16.2.1 Observation of Rat Periodontal Ligament Using Scanning Acoustic Microscopy -- 16.2.1.1 Scanning Acoustic Microscope (SAM) -- 16.2.1.2 Tissue Preparation.
16.2.1.3 Image Analysis -- 16.2.1.4 Statistics -- 16.2.2 Observation of Human Carious Dentin Using Acoustic Impedance Microscopy -- 16.2.2.1 Acoustic Impedance Microscope (AIM) -- 16.2.2.2 Tissue Preparation -- 16.2.2.3 Scanning Electron Microscopy (SEM) -- 16.2.2.4 Statistics -- 16.2.3 Portable Acoustic Stiffness Checker (PASC) -- 16.3 Results -- 16.3.1 SAM Observation of PDL -- 16.3.2 Sound Speed Analysis -- 16.3.2.1 AIM Observation of Dentin Caries -- 16.3.2.2 SEM Observation of Dentin Caries -- 16.3.3 Ultrasound Stiffness Checker -- 16.4 Discussion -- 16.4.1 SAM Observation of PDL -- 16.4.2 AIM Observation of Dentin Caries -- References -- Part V: Poster Presentation Award Winners -- Chapter 17: Activation of TLR3 Enhance Stemness and Immunomodulatory Properties of Periodontal Ligament Stem Cells (PDLSCs) -- 17.1 Introduction -- 17.2 Materials and Methods -- 17.2.1 PDLSC Culture -- 17.2.2 Poly(I:C) Treatment -- 17.2.3 Mineralization Assay -- 17.2.4 Gene Expression Analysis -- 17.2.5 Flow Cytometry -- 17.2.6 Statistical Analyses -- 17.3 Results and Discussion -- 17.4 TLR3 Activation Promote Stemness of PDLSCs -- 17.5 TLR3 Activation Enhance Immunosuppressive Properties of PDLSCs -- 17.6 TLR3 Activation Induces IFN(Sd(B Production in PDLSCs Via NF-kB Pathway -- 17.7 Conclusion -- References -- Chapter 18: Influence of Exogenous IL-12 on Human Periodontal Ligament Cells -- 18.1 Introduction -- 18.2 Materials and Methods -- 18.2.1 Cell Culture -- 18.2.2 Application of IL-12, IFN(Sd(B, IL-1(Sb(B, and TNF(Sa(B -- 18.2.3 Reverse Transcription-Polymerase Chain Reaction (RT-PCR) -- 18.2.4 Real-Time Polymerase Chain Reaction (Real-Time PCR) -- 18.2.5 Statistical Analyses -- 18.3 Results and Discussions -- 18.3.1 Expressions of IL-12 and IL-12 Receptor in Periodontal Tissue Increased During Periodontal Inflammation.
18.3.2 IL-12-Mediated IFN(Sd(B Expression in hPDL Cells via STAT4 and NF-kB Signaling Pathways.
Bu kütüphanenin etiketleri: Kütüphanedeki eser adı için etiket yok. Etiket eklemek için oturumu açın.
    Ortalama derecelendirme: 0.0 (0 oy)
Bu kayda ilişkin materyal yok

Intro -- Preface -- Acknowledgment -- Contents -- Part I: Symposium I: Biomaterials in Interface Science -- Chapter 1: Low-Modulus Ti Alloys Suitable for Rods in Spinal Fixation Devices -- 1.1 Introduction -- 1.2 Mechanism of Increasing Young's Modulus in Deformed Region -- 1.3 Possible Alloy System -- 1.4 Ti-Mo Alloys -- 1.4.1 Microstructures Before and After Deformation -- 1.4.2 Young's Modulus Change by Deformation -- 1.4.3 Deformation-Induced Products and Phase Constitutions -- 1.4.4 Springback -- 1.5 Ti-Cr Alloys -- 1.5.1 Microstructures Before and After Deformation -- 1.5.2 Young's Modulus Change by Deformation -- 1.5.3 Deformation-Induced Products and Phase Constitutions -- 1.5.4 Springback -- 1.6 Young's Modulus Under Solution Treatment Conditions and Increment Ratio of Young's Modulus by Cold Rolling -- 1.7 Toward Practical Applications -- 1.8 Summary -- References -- Chapter 2: Ceramic Coating of Ti and Its Alloys Using Dry Processes for Biomedical Applications -- 2.1 Introduction -- 2.2 Antibacterial Properties of Ag-Containing Amorphous Calcium Phosphate Coating Films -- 2.3 Photocatalytic Activity of TiO2 Layers Formed by Two-­Step Thermal Oxidation -- 2.3.1 UV (Ultraviolet) Response -- 2.3.2 Visible-Light Response -- 2.4 Summary -- References -- Chapter 3: Dealloying Toxic Ni from SUS316L Surface -- 3.1 Introduction -- 3.1.1 Dealloying in a Metallic Melt -- 3.1.2 Reaction Design for Dealloying Ni from SUS316L -- 3.2 Experimental Procedure -- 3.3 Results and Discussion -- 3.3.1 Dealloying Ni Treatments -- 3.3.2 Polarization Tests -- 3.3.3 Ion Release Tests -- 3.4 Conclusions -- References -- Chapter 4: Bio-ceramic Coating of Ca-Ti-O System Compound by Laser Chemical Vapor Deposition -- 4.1 Introduction -- 4.2 Laser Chemical Vapor Deposition -- 4.3 Bio-ceramic Coating of Ca-Ti-O by Laser CVD [25, 26] -- 4.4 Summary -- References.

Part II: Symposium II: Innovation for Oral Science and Application -- Chapter 5: Development of a Robot-Assisted Surgery System for Cranio-Maxillofacial Surgery -- 5.1 General Information of Surgical Robots -- 5.2 Computer-Aided Design (CAD) System for CMF Surgery -- 5.3 Surgical Robot for CMF Surgery -- 5.3.1 Conformation of the Robotic System -- 5.3.2 Safety Control of the Robotic System -- 5.3.3 Navigation and Trail Program -- 5.3.4 Test of the Robot -- 5.4 Medical Experiment for the Robotic System -- 5.4.1 Evaluation of the CAD Software -- 5.4.2 Accuracy of the Three-Dimensional Reconstruction of the CAD Software -- 5.4.3 Accuracy of the Navigation System -- 5.4.4 Animal Experiment of Robot-Assisted Operations -- References -- Chapter 6: Facilitating the Movement of Qualified Dental Graduates to Provide Dental Services Across ASEAN Member States -- 6.1 Formation of ASEAN to AJCCD -- 6.2 MRA for Free Flow of Services and Professionals -- 6.3 Impact on Dental Education -- 6.4 Facilitating Free Movement of Dental Professionals Across ASEAN -- 6.4.1 Current Work -- 6.4.2 Future Work -- 6.5 Conclusion -- References -- Chapter 7: Putting the Mouth into Health: The Importance of Oral Health for General Health -- 7.1 Introduvction -- 7.2 The Oral-Systemic Nexus -- 7.3 Oral-Systemic Health Associations -- 7.4 The Oral Environment: A Model for Other Body Systems -- 7.5 Summary -- References -- Chapter 8: Orofacial Stem Cells for Cell-Based Therapies of Local and Systemic Diseases -- 8.1 Overview -- 8.1.1 Need for Stem/Progenitor Cell-Based Therapy -- 8.1.2 Cell Sources During Orofacial Development -- 8.2 Mesenchymal Stem Cell-Derived Oral Tissues -- 8.2.1 Markers and Sources of Orofacial MSCs -- 8.2.2 Mesenchymal Stem Cells of Dental Pulp Stem Cells (DPSCs) -- 8.2.3 MSCs of the Periodontal Ligament, Apical Papilla and Follicles -- 8.3 Muscle Stem Cells.

8.3.1 Potential of Orofacial Muscle Stem Cells in Cardiac Repair -- 8.3.2 Developmental Similarities of Cardiac and Orofacial Myogenic Progenitors -- 8.3.3 An Interesting Example of Using Tongue Stem Cell for Cardiac Repair -- 8.4 Closing Remark -- References -- Chapter 9: Biomaterials in Caries Prevention and Treatment -- 9.1 Synthesis of Novel Mineralization Materials in Preventive Dentistry -- 9.2 Quaternary Ammonium Methacrylates (QAMs) -- 9.2.1 Killing Bacteria and Inhibiting Biofilms -- 9.2.2 Mechanical Properties -- 9.2.3 Durability -- 9.2.4 Biological Safety -- 9.2.5 Inhibiting MMPs -- 9.2.6 Mechanism -- 9.2.7 Resistant/Persister Bacteria -- 9.2.8 Models -- References -- Part III: Symposium III: Regenerative Oral Science -- Chapter 10: Efficacy of Calcium Phosphate-Based Scaffold Materials on Mineralized and  Non-­mineralized Tissue Regeneration -- 10.1 Introduction -- 10.2 Mineralized and Non-mineralized Tissue Responses -- 10.3 Matrix Materials for Calcium Phosphate -- 10.4 Cell Responses to Calcium Phosphate Materials -- 10.5 Conclusion -- References -- Chapter 11: Gene Delivery and Expression Systems in Induced Pluripotent Stem Cells -- 11.1 Introduction -- 11.2 Viral-Based Gene Delivery Systems -- 11.2.1 Adenovirus Vectors -- 11.2.2 AAV Vectors -- 11.2.3 Retrovirus Vectors -- 11.2.4 Lentivirus Vectors -- 11.3 Transposon-Based Gene Delivery Systems -- 11.4 tet-Controlled Transcriptional Regulation System -- 11.5 Conclusions -- References -- Chapter 12: Emerging Regenerative Approaches for Periodontal Regeneration: The Future Perspective of Cytokine Therapy and Stem Cell Therapy -- 12.1 Introduction -- 12.2 Periodontal Ligament as a Storage Site for Periodontal Tissue Stem Cells -- 12.3 Concept and Current Status of Periodontal Tissue Regenerative Therapy -- 12.4 Possibility of Cytokine Therapy.

12.5 Inducing Periodontal Tissue Regeneration with Basic Fibroblast Growth Factor (FGF-2) -- 12.6 Future Outlook of Cytokine Therapy Using FGF-2 -- 12.7 Possibility of Periodontal Tissue Regenerative Therapy with Stem Cell Transplantation -- 12.8 Conclusion -- References -- Chapter 13: Molecular Mechanisms Regulating Tooth Number -- 13.1 Introduction -- 13.2 Skin Appendage -- 13.3 Missing Teeth -- 13.3.1 Missing Teeth in Humans -- 13.3.1.1 Non-syndromic (Isolated) Familial Missing Teeth -- 13.3.1.2 Syndromic Missing Teeth -- 13.3.1.3 Sporadic Missing Teeth -- 13.3.2 Missing Teeth in Mice -- 13.4 Supernumerary Teeth -- 13.4.1 Supernumerary Teeth in Humans -- 13.4.1.1 Syndromic Extra Teeth in Humans -- 13.4.1.2 Missing and Extra Teeth in Humans -- 13.4.2 Supernumerary Teeth in Mice -- 13.5 Odontogenic Activity Between Tooth Germs -- 13.6 Tooth Initiation and Tooth Type -- 13.7 The Midline and Tooth Development -- 13.8 Conclusion -- References -- Part IV: Symposium IV: Medical Device Innovation for Diagnosis and Treatment of Biosis- Abiosis Interface -- Chapter 14: Open-Source Technologies and Workflows in Digital Dentistry -- 14.1 Cloud Base Solution for Intelligent Dental Clinic and Manufacturing System -- 14.2 Integration of Digital Information -- 14.3 A Shade Guide Development Based on Open-Source Technology -- 14.4 3D Printing Applications in Digital Dentistry -- 14.5 Conclusions -- References -- Chapter 15: Detection of Early Caries by Laser-Induced Breakdown Spectroscopy -- 15.1 Introduction -- 15.2 Experimental Setup -- 15.3 Results and Discussion -- 15.4 Conclusion -- References -- Chapter 16: Acoustic Diagnosis Device for Dentistry -- 16.1 Introduction -- 16.2 Materials and Methods -- 16.2.1 Observation of Rat Periodontal Ligament Using Scanning Acoustic Microscopy -- 16.2.1.1 Scanning Acoustic Microscope (SAM) -- 16.2.1.2 Tissue Preparation.

16.2.1.3 Image Analysis -- 16.2.1.4 Statistics -- 16.2.2 Observation of Human Carious Dentin Using Acoustic Impedance Microscopy -- 16.2.2.1 Acoustic Impedance Microscope (AIM) -- 16.2.2.2 Tissue Preparation -- 16.2.2.3 Scanning Electron Microscopy (SEM) -- 16.2.2.4 Statistics -- 16.2.3 Portable Acoustic Stiffness Checker (PASC) -- 16.3 Results -- 16.3.1 SAM Observation of PDL -- 16.3.2 Sound Speed Analysis -- 16.3.2.1 AIM Observation of Dentin Caries -- 16.3.2.2 SEM Observation of Dentin Caries -- 16.3.3 Ultrasound Stiffness Checker -- 16.4 Discussion -- 16.4.1 SAM Observation of PDL -- 16.4.2 AIM Observation of Dentin Caries -- References -- Part V: Poster Presentation Award Winners -- Chapter 17: Activation of TLR3 Enhance Stemness and Immunomodulatory Properties of Periodontal Ligament Stem Cells (PDLSCs) -- 17.1 Introduction -- 17.2 Materials and Methods -- 17.2.1 PDLSC Culture -- 17.2.2 Poly(I:C) Treatment -- 17.2.3 Mineralization Assay -- 17.2.4 Gene Expression Analysis -- 17.2.5 Flow Cytometry -- 17.2.6 Statistical Analyses -- 17.3 Results and Discussion -- 17.4 TLR3 Activation Promote Stemness of PDLSCs -- 17.5 TLR3 Activation Enhance Immunosuppressive Properties of PDLSCs -- 17.6 TLR3 Activation Induces IFN(Sd(B Production in PDLSCs Via NF-kB Pathway -- 17.7 Conclusion -- References -- Chapter 18: Influence of Exogenous IL-12 on Human Periodontal Ligament Cells -- 18.1 Introduction -- 18.2 Materials and Methods -- 18.2.1 Cell Culture -- 18.2.2 Application of IL-12, IFN(Sd(B, IL-1(Sb(B, and TNF(Sa(B -- 18.2.3 Reverse Transcription-Polymerase Chain Reaction (RT-PCR) -- 18.2.4 Real-Time Polymerase Chain Reaction (Real-Time PCR) -- 18.2.5 Statistical Analyses -- 18.3 Results and Discussions -- 18.3.1 Expressions of IL-12 and IL-12 Receptor in Periodontal Tissue Increased During Periodontal Inflammation.

18.3.2 IL-12-Mediated IFN(Sd(B Expression in hPDL Cells via STAT4 and NF-kB Signaling Pathways.

Description based on publisher supplied metadata and other sources.

Electronic reproduction. Ann Arbor, Michigan : ProQuest Ebook Central, 2022. Available via World Wide Web. Access may be limited to ProQuest Ebook Central affiliated libraries.

There are no comments on this title.

yorum yazmak için.

Ziyaretçi Sayısı

Destekleyen Koha